Ruckus Wireless MM2211 - Manual (Page 47)

8000013, July 2006 MM2211 Wireless Broadband Gateway User’s Guide 47
Updating the Firmware
!
CAUTION:—If you have recently made configuration changes to the MM2211 Gateway, make sure to reboot
the system (see
“Rebooting the System” on page 50 ) first so that your changes are preserved. Then update the
firmware.
To choose the manual firmware upgrade option, proceed as follows:
1. In the Auto F/W upgrade box of Figure 17 , check Disable.
2. The window of Figure 18 appears
Figure 18—Manual Firmware Upgrade Window
To download a firmware image from a Web site and use it to update the firmware on the MM2211 Gateway:
1. Point your browser to the Web site where the MM2211 Gateway’s firmware is stored, and download the
firmware image to a folder on your hard drive. Note the location of the downloaded image.