Ricoh Printer Reference - Manual (Page 118)

Other Print Operations
110
3
Staple
With the optional Finisher SR3010, Finisher SR3000 or Finisher 1000 installed,
sets can be stapled individually when printing multiple sets.
Staple Position
The specified staple position varies depending on paper size, type, quantity and
feed orientation. The following table shows staple positions:
Note
❒ Stapling might not be in the specified position if combine (layout) and duplex
printing are both selected. After setting the staple position, use the printer
driver's preview icon to check the position before printing.
Reference
For paper sizes and maximum numbers of sheets available for stapling, see
“Specifications”, General Settings Guide.
For printing methods, see the printer driver Help.
ANW100S