Ricoh Printer Reference - Manual (Page 155)

147
7. Appendix
Specifications
This section contains the machine's electrical and hardware specifications, in-
cluding information about its options.
Component Specifications
Resolution 600 × 600 dpi
300 × 300 dpi
Printing speed Type 1:
• Color: 25 ppm
• B&W: 25 ppm
Type 2:
• Color: 30 ppm
• B&W: 30 ppm
(A4K, 8 1 /
2
× 11 K plain paper)
Printing speeds depend on the machine. Check which type of ma-
chine you have. See General Settings Guide.
Interface Standard:
• Ethernet interface (100BASE-TX / 10BASE-T)
• USB 2.0 interface
Option:
• IEEE 1284 parallel interface
Use a standard 36-pin printer cable not longer than 3 meters (10
feet).
• IEEE 1394 interface
• IEEE 802.11b wireless LAN interface
• Bluetooth interface
• USB Host interface
Network protocol IPv4, IPv6, IPX/SPX, AppleTalk
Printer language Standard: PCL 6/5c, RPCS
Option: PostScript 3, PDF Direct, PictBridge
Fonts PCL 6/5c:
Agfa Monotype 35 Intellifonts, 10 TrueType fonts, 13 International
fonts, and 1 Bitmap font.
PostScript 3 :
136 fonts (Type 2:24, Type 14:112)
Memory 1024 MB
Hard disk Storage capacity : 40 GB
Network cable 100BASE-TX / 10BASE-T shielded twisted-pair (STP, Category
/Type5) cable.