Roland JUNO-D User Manual

Page 12

Advertising
background image

12

Panel descriptions

PAGE/CURSOR [

]/[

] /

JUMP [

]/[

] buttons

PAGE/CURSOR:

Use these buttons to move between pages or to
move the cursor (p. 42).

JUMP:

In grouped pages, you can hold down [SHIFT]
and use these buttons to move between groups
(p. 42).

While one of these buttons is first held down and the other is
pressed, the page or cursor then moves rapidly.

[EXIT] button

Press this button to return to the main screen of a mode, or when you
want to cancel the current operation.

[ENTER] button

Use this button to finalize a value or execute an operation.

[SHIFT] button

By holding down this button and pressing another button, you can
access a secondary function of that button (printed below the button
in square brackets).

[TAP TEMPO] button

Adjusts the tempo according to the timing at which you tap this
button. You can also use VALUE [-]/[+] to adjust the tempo if
desired (p. 37).

H

PATCH MODIFY section

[DESTINATION TONE] button

Selects either UPPER or LOWER as the tone to be edited.

Patch Modify select button

Selects whether the three knobs located at the right will edit the
envelope or the balance and LFO.

• If envelope is selected (ENV indicator lit)

[ATTACK] knob

Adjusts the attack speed of the sound (p. 28).

[DECAY] knob

Adjusts the speed at which the sound decays while you
continue holding the key (p. 28).

[RELEASE] knob

Adjusts the length of the release after you take your finger off
the key (p. 28).

• If balance/LFO is selected (BALANCE/LFO

indicator lit)

[BALANCE] knob

Adjusts the LOWER and UPPER volume balance (p. 26).

[LFO RATE] knob

Adjusts the rate of the LFO effect, such as vibrato (p. 27).

[LFO DEPTH] knob

Adjusts the depth of the LFO effect, such as vibrato (p. 27).

[KEY MODE] button

Switches the Key Modes (p. 44).

[FILTER LFO] button

This determines whether the LFO changes the filter cutoff frequency
(ON), or the pitch (OFF) (p. 27).

[CUTOFF] knob

Changes the tone’s Cutoff Frequency value (p. 29).

[RESONANCE] knob

Changes the tone’s Resonance value (p. 29).

I

Pitch bend/Modulation lever

This allows you to control pitch bend or apply vibrato (p. 29).

JUNO-D_e.book 12 ページ 2004年6月11日 金曜日 午後1時21分

Advertising