Switching chord sets – Roland JUNO-D User Manual
Page 25
25
Try out the sounds
Quick Start
■
Switching chord sets
Then, try to change chord sets.
fig.q04-10
3.
Use VALUE [-]/[+] to select a Chord Set.
The user chord set appears after the preset chord sets.
4.
When you press [EXIT], the Multi-chord Memory function will remain on
and you will return to the previous screen.
If you want to select a chord set once again, press [CHORD MEMORY] so it goes out,
and then press [CHORD MEMORY] once again so it is lit.
The selected chord set remains stored in memory even while the power is off.
5.
To turn off the Multi-chord Memory function, press [
CHORD MEMORY
]
again so the indicator goes out.
5
4
3
You can create your own chord set by saving chords you have created.
For further information, refer to Creating an original chord set (User Chord Set)
(p. 64).
JUNO-D_e.book 25 ページ ２００４年６月１１日 金曜日 午後１時２１分