Rio Audio Advanced Digital Audio Center - Manual (Page 74)

72 | Installing emplode
emplode on your PC
emplode is software for your PC. Use emplode to create, organize, and search
your digital audio collection.
NOTE: Exit the Menu system on the Rio Advanced Digital Audio
Center before using emplode. To exit the menu system, press
the Now Playing button on the Rio Advanced Digital Audio
Center.
Installing emplode
1. Make sure your PC and the Rio Advanced Digital Audio Center are connected
either via a network or using the included USB cable.
2. Place the Rio Advanced Digital Audio Center Installation CD in your
PC’s CD-ROM drive.
3. When the Installation Wizard appears on the monitor, click Install
emplode.
4. Follow the instructions on the screen to complete the installation process.
If the CD does not autoload:
1. Place the Rio Advanced Digital Audio Center Installation CD in the
PC’s CD-ROM drive.
2. Click Start at the bottom-left side of the PC’s desktop.
3. Click Run.
4. Type in X:\Setup32.exe where X is the letter corresponding to your PC’s
CD-ROM drive.
5. Press the Enter key.
This displays the Installation Wizard on the CD and allows you to install
the available programs.
Using emplode
1. Once emplode is finished installing, click Start on your computer screen,
then navigate to Programs > Rio emplode > emplode.
This will launch the emplode program, which will first locate your Rio
Advanced Digital Audio Center on your network or USB port.