Radio Shack DVD / VCR - Manual (Page 21)

– 21 – EN
D
VD Functions
– 21 – EN
DISPLAY Setting
You can change the display functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 20.
B
AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps
1) to 3) in the “CUSTOM Menu” section on page 20.
C
4 4
SETUP AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL ON
ON
BITSTREAM
5 5
Hint Hint
TV ASPECT:
• Select “4:3 LETTER BOX”, so
that black bars may appear on
the top and bottom of the screen.
• Select “4:3 PAN & SCAN” for
a full height picture with both
sides adjusted.
• Select “16:9 WIDE” if a wide-
screen TV is connected to
this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, automat-
ically select the best resolution
setting (FRAME or FIELD)
based on the data characteris-
tics of the pictures (default).
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
• An individual picture on TV
screen is called as “frame”,
which consists of two sepa-
rate images called as “field”.
• Some pictures may be blurred
at the “AUTO” setting in the
still mode due to their data
characteristics.
PROGRESSIVE:
• You can set “PROGRESSIVE” to
“OFF” either in the DISPLAY
menu or by pressing and hold-
ing [PLAY B
B ] on the front of the
unit for more than 5 seconds.
• When “PROGRESSIVE” is “ON”,
video signals from VIDEO OUT
and S-VIDEO OUT jacks will be
distorted or not be output at all.
4 4 Select the desired item.
DISPLAY menu
Select the desired item.
AUDIO menu
6 6 To exit the menu
TV ASPECT:
(Default: 4:3 LETTER BOX)
See Hint on the right. QUICK
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE OFF
Select the
desired
setting.
or
STILL MODE:
(Default: AUTO)
See Hint on the right.
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE OFF
STILL MODE
AUTO
FIELD
FRAME
Select the
desired
setting.
or
5 5 6 6 To exit the menu
SETUP
SETUP
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOLBY DIGITAL:
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: Outputs a Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2 channel). QUICK
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
OFF
ON
BITSTREAM
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON
ON
PCM
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON
OFF
BITSTREAM
Hint Hint
DRC:
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing disc with
copyright Protection, the
sound will be down sam-
pled at 48kHz, even if
you set to “OFF”.
• This function is avail-
able only on digital out-
putting of a disc
recorded in 96kHz.
SETUP DISPLAY
TV ASPECT
STILL MODE
PROGRESSIVE 4:3 LETTER BOX
AUTO
OFF
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
or
or
6 6 To complete the
PROGRESSIVE
setting
5 5
PROGRESSIVE:
(Default: OFF)
See Hint on the right. QUICK
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE OFF
4:3 LETTERBOX
AUTO
ON
ENTER ENTER ENTER
SETUP
Select
“YES”.
or
ENTER ENTER ENTER
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting “YES”,
wait about 15 seconds for auto recovery.
A c t i va t e P r o gr e s s i ve ?
SELECT: K / L SET:ENTER
NO
YES
NO
YES NO
YES
Confirm again to use progressive scan.
If Picture is good, Select “YES”.
SELECT: K / L SET:ENTER
Select
“YES”.
or
If “PROGRESSIVE” is “ON”,
this message appears:
If there is no picture or you do not
press any buttons for 15 seconds,
Progressive Scan will switch to “OFF”.
ENTER ENTER ENTER