Roland KF-90 - Manual (Page 108)

108
Chapter 4 Recording and Saving the Performance
Creating a Rhythm Part with Ease
The KF-90 has a large number of onboard rhythm patterns. You can use
these onboard rhythm patterns to create a rhythm part with ease.
1.
Press the [Composer Navigator] button, getting its indicator
to light up.
The Composer Navigator screen appears.
2.
Touch <Rhythm Pattern>.
The following screen will appear.
fig.04-11.e_60
Touch <Exit> to go back to the previous screen.
3.
Use the touch screen to choose a rhythm pattern.
You can use the Value [-] [+] buttons or the dial.
Rhythm patterns are shown in the format “name (number of bars).”
4.
Touch <Audition> on screen to hear the rhythm pattern.
Make sure the rhythm pattern you hear is the one you chose.
To stop the rhythm pattern, touch <Stop> on the screen.
5.
Touch <Record> on the screen to start recording.
The rhythm pattern begins to play, and at the same time, recording starts.
Record rhythm patterns only for the necessary number of measures.
6.
Touch <Stop> on the screen to stop recording.
The rhythm pattern stops, and recording ends.
The rhythm pattern is
recorded to the <R/
Rhythm> Track button.
When using the 16-track
sequencer (p. 118), you can
record only to Part D (10).
You can also paste a
rhythm pattern into a song
without recording
anything. Take a look at
“Copying a Rhythm
Pattern” (p. 126).
For more information
about onboard rhythm
patterns, please refer to
“Rhythm Pattern List” (p.
177).