Roland KF-90 - Manual (Page 155)

155
Chapter 8 Changing Various Settings
Chapter 8
Repositioning the Touch Screen
If you’ve been using the Touch Screen for some time, the
pointer may be shifted, making the KF-90 react incorrectly.
You should correct this displacement when necessary by
performing calibration (repositioning).
1. Press the [Function] button.
2. Touch <System Setting>.
3. Touch <Touch Screen>.
If <Touch Screen> is not displayed, touch Page < >
and < > to switch screens.
fig.08-30.eps
Touch <Exit> to go back to the Function screen.
4. Touch <Execute> on the screen.
5. Touch the points indicated on the touch screen.
* Do this carefully, because touching a location that’s different
from the one indicated for the pointer may make the
displacement even worse. Be sure to touch the pointer
accurately.
6. Touch <Memorize> at the bottom of screen to
store the setting of calibration to KF-90.
* If you turn the power off before doing step 6, the setting of
calibration will go away.