Auto play, Auto repeat, Using the playback features – RCA TV/VCR COMBINATION User Manual

Page 21: 19 playing a tape, Auto play feature, Auto repeat feature

Advertising
background image

TV/VCR MAIN MENU

1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup

TV/VCR MAIN MENU

1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup

19

Playing a Tape

Using the Playback Features

Auto Play Feature

This feature enables the TV/VCR to automatically start
playing a tape when it is inserted. (The safety tab on the
tape must be removed.)

1

. Press MENU to display the TV/VCR MAIN MENU.

2

. Press 5 to display the SETUP menu.

3

. Press 4 to change the Auto Play setting.

The Auto Play feature is set to ON at the factory.

• Select ON if you want a tape with its safety tab

removed to start playing automatically.

• Select OFF if you do not want a tape with its

safety tab removed to start playing automatically.

SETUP

1 Auto Channel Search
2 Add/Remove Channels
3 Set Auto Repeat
4 Auto Play: ON
5 Signal Type: CABLE

0 Exit

Auto Repeat Feature

This feature tells the TV/VCR to play a tape (or part of
a tape) continuously. The TV/VCR will automatically
rewind the tape, or a selected portion of the tape, and
play it repeatedly.

1

. Using REW, FF, or PLAY, go to the place on the tape

that you want to be the beginning of the section
that automatically repeats. Reset the time counter to
0:00:00

by pressing DISPLAY, then CLEAR.

2

. Using FF or PLAY, go to the place on the tape that

you want to be the end of the section that plays
continuously. Remember the numbers on the time
counter. (2:55 is the end time for AUTO REPEAT in
the example to the right.)

3

. Press MENU to display the TV/VCR MAIN MENU.

4

. Press 5 to display the SETUP menu.

5

. Press 3 to display the AUTO REPEAT menu.

6

. Using the number buttons, enter the amount of time

you want the tape to repeat (the number from Step 2).
In the example at right, the section that the TV/VCR
will automatically repeat is 2:55 – two hours, 55
minutes long.

To Cancel Auto Repeat

Press MENU, 5, 3, and CLEAR.

SETUP

1 Auto Channel Search
2 Add/Remove Channels
3 Set Auto Repeat

AUTO REPEAT

Set the length of time you
want the tape to play in a
repeating loop

Loop from 0:00 to 2:55

(h:mm)

Press CLEAR to turn off
Press MENU to exit

Advertising