RCA TV/VCR COMBINATION - Manual (Page 29)

27
Operating Instructions (Refer to hookup on page 30.)
Use another VCR or camcorder as the playback VCR and
the TV/VCR as the recording VCR.
1 . Turn on the VCR or camcorder and the TV/VCR.
2 . Press 00 on TV/VCR’s remote to select the line input
(VIDEO1 or VIDEO2). Pressing 00 once tunes the TV/VCR
to the AUDIO/VIDEO1 input jacks on the rear of the
TV/VCR. Pressing 00 twice tunes the TV/VCR to the
AUDIO/VIDEO2
input jacks on the front of the TV/VCR.
3 . Insert the tape you want to copy into the playback VCR
or camcorder. Insert a blank tape with safety tab intact
into the TV/VCR.
4 . Start the playback VCR or camcorder playing. If the
tape was not recorded on the playback VCR, streaks
may appear and you may need to adjust the tracking.
When you reach the place you want to begin copying,
place the playback VCR or camcorder in play pause.
5 . Press REC, then PAUSE, on the TV/VCR’s remote.
6 . Press PAUSE on both the VCR or camcorder and the
TV/VCR’s remote at the same time to begin copying
the tape.
7 . Edit out segments that you do not want to copy by
pressing PAUSE on the TV/VCR’s remote to pause the
tape. Then, locate the next segment you want to copy on
the playback VCR or camcorder by using FF, REW, or
PLAY
. Press PAUSE on the playback VCR or camcorder.
Press PAUSE at the same time on both the VCR or
camcorder and the TV/VCR’s remote to resume
copying.
8 . Press STOP on both the VCR or camcorder and the
TV/VCR’s remote when you are finished.
Caution: The unauthorized
recording of television pro-
grams and other materials
may infringe upon the rights
of others.
Recording a Program
Copying and Editing Tapes
VIDEO1
SKIP
SPEED
OFF
REW
PLAY
FF
REC
STOP
PAUSE
DISPLAY
SLEEP
MUTE
PREV
1
2
3
4
5
6
7
8
9
0
TRACK
F.ADV
CLEAR
MENU
RESET
-
TV
VCR
+
CHAN
V
O
L
CHAN
V
O
L
S
E A
R C H