Roland CDX-1 - Manual (Page 183)

183
Insert effect algorithm list
Insert effect algorithm list
● DLY (Delay): This creates a thicker sound by applying a delayed sound to the direct sound.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the delay effect on/off.
Delay Time (Delay Time) SINGLE: 1–1400 mS This parameter adjusts the delay time (i.e., the interval for which sound is
delayed).
TAP: 1–700 mS
Feedback (Feedback) 0–100 This parameter adjusts the amount of feedback. Changing the amount of
feedback causes the number of time the delayed sound is repeated to
change as well.
Effect Level (Effect Level) 0–120 This adjusts the volume of the delay sound.
■ GUITAR
Parameter (full name) Setting Function
● A.MDL (Acoustic Guitar Modeling): This models the sound of an acoustic guitar.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the acoustic guitar modeling effect on/off.
Pick Up Type (Pick Up Type) SINGLE, HUMBUCK Set this to the type of pickup on the connected guitar.
Character (Character) STD This is a normal acoustic guitar.
JUMBO This is an acoustic guitar with a body that is bigger than STANDARD. The
bass sound is powerful.
ENHANCE This is an acoustic guitar that with a more responsive attack, so the guitar
will retain more of its prominence in almost any situation.
PIEZO This models the sound you would get from a pickup installed on an electric-
acoustic guitar.During the attack, a certain amount of compression will be
applied.
Top-Hi (Top-Hi) -100–+100 * Adjust the level of the direct sound from the strings. That is, it adjusts the
harmonic contents.
Top-Mid (Top-Mid) -100–+100 * This adjusts the interference to the strings made by the top plate. That is,
it adjusts the attack sense.
Body (Body) -100–+100 * This adjusts the resonance of the sound caused by the body. That is, it
adjusts the softness and fatness of the sound which is the typical
characteristics of acoustic guitars.
Level (Level) 0–100 This adjusts the volume of the acoustic guitar modeling.
* If Top-Hi, Top-Mid, and Body are all set to “-100“, there will be no sound.
If you set the pickup selector of your guitar to the front position, the desired effect will be easier to achieve.
● COMP (Compressor): Compressor the entire output signals when the input volume exceeds a specified value.
For details on the parameters, refer to “COMP“ on the preceding page.
● NS (Noise Suppressor): This effect reduces the noise and hum.
For details on the parameters, refer to “NS“ on the preceding page.
● DLY (Delay): This creates a thicker sound by applying a delayed sound to the direct sound.
For details on the parameters, refer to “DLY,“ above.