Roberts Radio CRD-26 - Manual (Page 13)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
12
4. Press the Tuning up or down buttons to select the desired alarm
1-4.
5. Press the Select button to enter the alarm hour. The display will show
the current time in 24 hour format. The hour digit will be selected.
Note: Alarm times are set using 24Hr format e.g. 2:30PM is
entered as 14:30
6. Press the Tuning up or down buttons to set the correct hour.
7. Press the Select button to enter the alarm minutes. The minute digit
will be selected.
8. Press the Tuning up or down buttons to set the correct minutes.
9. Press the Select button to enter the alarm day option. Your alarm
can be set to sound once, daily, weekdays and weekends.
Once - Will sound at one time only.
Daily - Will sound every day.
Weekdays - Will sound only on weekdays.
Weekends - Will sound only on weekends.
10. Press the Tuning up or down buttons to select either once, daily,
weekdays or weekends.
• If setting alarms to daily, weekdays or weekends proceed to point
18 (Setting alarm mode).
4,6
4,6
5,7
8,10
8,10
9