Roberts Radio CRD-26 - Manual (Page 20)

Dynamic Range Control (DRC) settings
DRC can make quieter sounds easier to hear when your radio is used in
a noisy environment.
1. Press the On/Off button to switch on your clock radio.
2. Press the Menu button to enter the menu setup.
3. Press the Tuning up or down buttons until "DRC value" appears on
the display. Press the Select button. The display will show the current
DRC value on the top line.
4. Press the Tuning up or down buttons to select the required DRC
setting. Default is 0.
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
5. Press and release the Select button to confi rm the setting. The display
will return to radio mode.
2
3,4
3,5
1
3,4
19