Radio Shack 22-1670 - Manual (Page 15)

15
AUDIO MODES
While the detector is sounding a radar or Safety Warn-
ing System alert, you can press
AUD to temporarily
silence it. The detector returns to normal operation after
the radar signal stops.
You can change the alert pattern to sound several X-,
K-, or Ka-tones followed by muted clicking by pressing
AUD when no alert is sounding. The detector briefly dis-
plays AUTOMUTE . The clicking becomes more rapid as
the radar signal strength increases. Press AUD again to
return to normal operation. The detector briefly displays
AUTO off .
Note: Laser alerts are not affected by the audio modes.
TURNING ON SAFETY WARNING
SYSTEM AND VG-2 DETECTION
You can turn the Safety Warning System and VG-2
detection on and off to suit your needs. Follow these
steps to change these features.
1. With the detector off, press and hold CTY , then
press P/V . The detector beeps and briefly displays
FEATURES . Then the detector either displays SWS
on or flashes SWS off .
2. Press AUD to change the SWS setting.
22-1670.fm Page 15 Friday, August 6, 1999 10:17 AM