Radio Shack TAD-779 - Manual (Page 8)

8
Follow these steps so the TAD can
record the correct day and time each
message and memo is recorded.
Note: If you do not complete each step
within 8 seconds, the TAD-779 sounds
three beeps and exits from setup. Start
again at Step 1.
1. Use a pointed object such as a
straightened paper clip to hold down
CLOCK until the TAD-779 beeps and
announces the currently set day.
2. To change the day of the week,
repeatedly press REPEAT to move
backward or SKIP to move forward
until the TAD announces the desired
day of the week.
Illus. showing CLOCK
button.
Illus. showing OGM/REPEAT
and PLAY/SKIP.
3. Press STOP . The TAD-779 beeps
and announces the hour.
4. To change the hour, repeatedly
press REPEAT or SKIP .
5. Press STOP . The TAD-779 beeps
and announces the minutes.
6. To change the minutes, repeatedly
press REPEAT or SKIP .
Note: To change the time in 10-
minute increments, hold down
REPEAT or SKIP .
7. Press STOP to confirm the settings.
The TAD beeps and announces the
day and time.
To check the current day and time at
any time, use a pointed object such as a
straightened paper clip to press
CLOCK .
Illus. showing ANSWER/
STOP/DELETE.
43-779.fm Page 8 Monday, August 16, 1999 7:34 AM