Singing with another audio source – Radio Shack 32-1156 User Manual
Page 11
11
3. Load a prerecorded cassette
tape.
4. Set
TAPE/AUX
on the back of the
system to
TAPE
.
5. Press
PLAY
to play the tape.
6. Adjust
MASTER VOLUME
to the
desired sound.
7. Set
TONE
to
LOW
or
HIGH
.
8. Set the microphone’s
ON/OFF
switch to
ON
. Sing directly into
the microphone along with the
music.
9. Use
MIC 1
or
2
’s
VOLUME
to
adjust the microphone’s volume.
10. Adjust
ECHO
to add an echo to
your voice.
11. If you are using a karaoke cas-
sette tape, set
TAPE CHANNEL
to
MUSIC
,
NORMAL
or
VOCAL
.
Note: With a regular (non-
karaoke) tape, you cannot sepa-
rate the prerecorded original
singer’s voice and the music.
12. If you are using a karaoke cas-
sette tape and
TAPE CHANNEL
is set to
NORMAL
, set
VOCAL
CHANGER
to
ON
or
OFF
.
13. When you finish, press
STOP/
EJECT
to stop the tape, set the
microphone’s
ON/OFF
switch to
OFF
, and set
POWER
to
OFF
to
turn off the system. The
POWER
indicator turns off.
SINGING WITH
ANOTHER AUDIO
SOURCE
If you connected another audio
source as described in “Connecting
Another Audio Source,” follow these
steps to sing along with the sound
from that audio source.
Caution:
To protect your hearing, set
the system’s and the source’s vol-
ume to their lowest settings before
you turn on the system and the audio
source.
1. Set
POWER
to
ON
to turn on the
system. The POWER indicator
lights.
2. Set
TAPE/AUX
on the back of the
system to
AUX
.
32-1156.fm Page 11 Monday, August 9, 1999 2:24 PM