Recording from another audio source – Radio Shack 32-1156 User Manual
Page 14
14
RECORDING FROM
ANOTHER AUDIO
SOURCE
Follow these steps to just record
(without adding your voice) from an
audio source connected to the sys-
tem’s
AUX INPUT
jack.
1. Load a blank cassette tape, or
one that you want to record over,
into the cassette compartment.
2. Set
POWER
to
ON
to turn on the
system. The POWER indicator
lights.
3. Set
TAPE/AUX
on the back of the
system to
AUX
.
4. Press
PAUSE
, then
RECORD
on
the system.
RECORD
and
PLAY
both lock down.
5. Start the audio source.
6. Press
PAUSE
on the system to
start recording.
Notes:
• Press
PAUSE
on the system
to temporarily stop recording.
Press
PAUSE
again to resume
recording.
• You can listen through the
system to the audio source as
you record it. Set
MASTER
VOLUME
to a comfortable lis-
tening level. The volume set-
ting does not affect the
recording level.
7. Press
STOP/EJECT
on the sys-
tem to stop recording.
RECORD
and
PLAY
release.
8. Turn off the audio source.
32-1156.fm Page 14 Monday, August 9, 1999 2:24 PM