P.102, 2voi pch shifter (2voice pitch shifter), Step pch shifter (step pitch shifter) – Roland JUNO-Di User Manual

Page 102: Reverb, Gated reverb, Od → chorus (overdrive → chorus), Flanger (overdrive, Flanger), Od → delay (overdrive → delay), Dst → chorus (distortion → chorus)

Advertising
background image

102

Effects List

Shifts the pitch of the original sound. This 2-voice pitch shifter has two

pitch shifters, and can add two pitch shifted sounds to the original sound.

A pitch shifter in which the amount of pitch shift is varied by a 16-step

sequence.

Adds reverberation to the sound, simulating an acoustic space.

This is a special type of reverb in which the reverberant sound is cut off

before its natural length.

62:

2VOI PCH SHIFTER
(2VOICE PITCH SHIFTER)

Item

Value

Description

Pch1 Coarse

-24-+12 semi

Adjusts the pitch of Pitch Shift 1 in
semitone steps.

Pch2 Coarse

-24-+12 semi

Settings of the Pitch Shift 2 sound.
The items are the same as for the
Pitch Shift 1 sound.

Balance

D100:0W-D0:100W

Volume balance between the
direct sound (D) and the pitch
shifted sound (W)

63:

STEP PCH SHIFTER
(STEP PITCH SHIFTER)

Item

Value

Description

Rate

0.05–10.00 Hz, note

Rate at which the 16-step
sequence will cycle

Balance

D100:0W–D0:100W

Volume balance of the original
sound (D) and pitch-shifted sound
(W)

64:

REVERB

Item

Value

Description

Type

ROOM1, ROOM2,
STAGE1, STAGE2,
HALL1, HALL2

Type of reverb

ROOM1:

dense reverb with

short decay

ROOM2:

sparse reverb with

short decay

STAGE1:

reverb with greater

late reverberation

STAGE2:

reverb with strong

early reflections

HALL1:

reverb with clear

reverberance

HALL2:

reverb with rich

reverberance

Time

0–127

Time length of reverberation

65:

GATED REVERB

Item

Value

Description

Type

NORMAL, REVERSE,
SWEEP1, SWEEP2

Type of reverb

NORMAL:

conventional gated

reverb

REVERSE:

backwards reverb

SWEEP1:

the reverberant

sound moves from right to left

SWEEP2:

the reverberant

sound moves from left to right

Gate Time

5–500 msec

Adjusts the time from when the
reverb is heard until it
disappears.

66:

OD

CHORUS (OVERDRIVE

CHORUS)

Item

Value

Description

Overdrive
Drive

0–127

Degree of distortion

Also changes the volume.

Chorus Rate

0.05–10.00 Hz, note

Frequency of modulation

Chorus Depth

0–127

Depth of modulation

Level

0–127

Output Level

67:

OD

FLANGER (OVERDRIVE

FLANGER)

Item

Value

Description

Overdrive
Drive

0–127

Degree of distortion

Also changes the volume.

Flangr Rate

0.05–10.00 Hz, note

Frequency of modulation

Flangr Depth

0–127

Depth of modulation

Level

0–127

Output Level

68:

OD

DELAY (OVERDRIVE

DELAY)

Item

Value

Description

Overdrive Drive

0–127

Degree of distortion

Also changes the volume.

Delay Time

0–2600 msec, note

Adjusts the delay time from the
direct sound until the delay sound
is heard.

Delay
Feedback

-98–+98%

Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings will
invert the phase.

Level

0–127

Output Level

69:

DST

CHORUS

(DISTORTION

CHORUS)

Item

Value

Description

Dst Drive

0–127

Degree of distortion

Also changes the volume.

Chorus Rate

0.05–10.00 Hz, note

Frequency of modulation

Chorus Depth

0–127

Depth of modulation

Level

0–127

Output Level

70:

DST

FLANGER

(DISTORTION

FLANGER)

Item

Value

Description

Dst Drive

0–127

Degree of distortion

Also changes the volume.

Flangr Rate

0.05–10.00 Hz, note

Frequency of modulation

Flangr Depth

0–127

Depth of modulation

Level

0–127

Output Level

JUNO-Di_e.book 102 ページ 2009年6月22日 月曜日 午前9時23分

Advertising