Radio Shack TAD-1024 - Manual (Page 10)

10
Important: Do not tell callers that
you are not home. Instead, say that
you cannot come to the phone right
now.
3. When you finish recording, press
STOP/TIME SET. The TAD automati-
cally plays back the outgoing mes-
sage.
To play back your outgoing OGM 1 mes-
sage at any time, press
OGM 1 . A1 ap-
pears, the TAD beeps, and the outgoing
message plays.
To play back your OGM 2 message at
any time, press
OGM 2 , A2 appears, the
TAD beeps, and the announcement-only
message plays.
SETTING THE NUMBER
OF RINGS
The ring select switch on the back of the
TAD controls how long the TAD waits
before it answers a call. Slide the switch
to the appropriate position.
2 — The TAD answers after two rings.
4 — The TAD answers after four rings.
7 — The TAD answers after seven rings.
T.S. (Toll Saver) — If there are new mes-
sages, the TAD answers after two rings.
Otherwise, the TAD answers after four
rings. This lets you avoid unnecessary
charges when calling by long-distance to
check your messages. If you hear more
than two rings, you know you can hang
up because the TAD has no new mes-
sages.
43-784.fm Page 10 Monday, August 16, 1999 7:47 AM