Roberts Radio SRCD970 - Manual (Page 5)

If you need any further advice, please
call our Technical Helpline on
0181 758 0338 (Mon-Fri)
CD operation
Playing a disc
Press the open button (12) to open the CD compartment. Carefully place
a disc onto the spindle in the CD compartment, ensuring that the label is
facing upwards. Close the lid ensuring it latches shut. Slide the Tape/Radio/
CD switch (3) to the "CD" position. The Liquid crystal display (17) will light
up if the unit is connected to the mains supply. Press the CD play/pause
button (9) to play the disc. Adjust the volume control (4) and tone control (1)
to the required settings. To switch off, slide the Tape/Radio/CD switch (3)
to the "Off/Tape" position.
Pausing during CD play
Whilst the CD is playing, press the CD play/pause button (9) to pause play.
The disc will continue rotating, but play will stop and the pause symbol will
appear on the Liquid crystal display (17). To resume play, press the CD
play/pause button (9) again. The pause symbol will disappear from the
Liquid crystal display.
Stopping CD play
To stop CD play, press the stop button (8). The disc will stop rotating.
Track change function
Whilst the CD is playing, press either the F Skip or B Skip buttons (11) to
change to the desired track. You can also change tracks when the player
is in stop mode. Change to the desired track using the F Skip or B Skip
buttons (11) and press the play/pause button (15) to commence play of the
selected track.
Repeat function
To repeat only one track, press the repeat button (7) until the Liquid crystal
display shows REPEAT 1.
To repeat all tracks on a disc, press the repeat button (7) until the Liquid
crystal display shows REPEAT.
To cancel the repeat function, press the repeat button (7) until the word
REPEAT 1 or REPEAT is removed from the Liquid crystal display.