Roland Atelier AT900 - Manual (Page 255)

253
Connecting with External Device
Connecting with External Device
Aux-Setting2.eps
AT-900/AT-900C
Aux Out :
Aux Out Mode:
ON
TO EFFECTOR
Front Speaker R
Rear Speaker R Rear Speaker L
Front Speaker L
Amplifier
Amplifier
Main Output
Line Input
Line Output
External Reverb
Device
USER PROGRAM 3 MUTE 1 2
POWER
TIME LEVEL ROOM WALL
EXIT ( PUSH ) VALUE S 3 S 1 S 4 S 2
F 4 F 2 F 1 F 3
AUX MIN MIN MAX MAX MAX LINE INPUT LEVEL LOW - FREQ OUTPUT ROLL-OFF
6dB 12dB
40 Hz FREQ MIN LEVEL 700 Hz
SETUP / CHECK
Aux/Drums Output
Settings for Using an External Reverb Processor
You can use an external reverb processor to apply reverb to
the ATELIER’s sound.
AT-900_e.book 253 ページ ２００８年９月１６日 火曜日 午前１０時３８分