Roland Atelier AT900 - Manual (Page 69)

67
Selecting and Playing Sounds
Selecting and Playing Sounds
You can perform even more effectively with an articulation voice by making
the appropriate solo mode and foot switch settings.
You can automatically set these controller settings so that they are ideal for
performing with an articulation voice.
1.
In the articulation voice select screen, touch <Auto Set>.
fig.01-17.eps
The following message appears.
To cancel the change, touch <Cancel>.
2.
Touch <OK> to change the setting.
The settings will be changed as follows.
Making the Ideal Settings for Playing an Articulation Voice
Item Setting Page
After Touch ON p. 211
Solo Mode POLYPHONIC p. 161
L Foot Switch ART. CONTROL1 p. 136
AT-900_e.book 67 ページ ２００８年９月１６日 火曜日 午前１０時３８分