Radio Shack CD-3445 - Manual (Page 13)

13
Storing a Programmed
Sequence
You can program up to 21 tracks on a
CD to play in any order you choose.
You can program the same track to
play more than once.
1. Press MEMORY . P:01 (the first
memory location) appears.
2. Press either or to find
the track number you want to
store.
3. Press MEMORY again. The track is
stored in memory.
4. Repeat Steps 2 and 3 to store
more tracks.
5. Press (Play/Pause). Play-
back starts with the first track you
stored and stops after the last
track you stored.
Note: You can use either or
to move to another track in
the programmed sequence.
6. To play the tracks in memory
again, press MEMORY , then press
(Play/Pause).
To stop playback, press (Stop).
To clear the memory sequence, press
STOP , then press OPEN .
Checking/Editing a
Programmed Sequence
You can check and change any of the
stored tracks in your programmed se-
quence.
1. Press MEMORY . The memory
location and the track stored in it
appear on the display.
Notes:
• Repeatedly press MEMORY to
see the next stored track.
• When you store less than 21
tracks, if you continue to press
MEMORY after the last stored
track appears, the display
returns to
00 .
• When you store 21 tracks, if
you continue to press MEMORY
after P:21 appears on the dis-
play, the display returns to 01 .
(illus)
(illus)
t
t
n
42-5056.fm Page 13 Thursday, August 12, 1999 9:25 AM