Intercom calls – RCA DECT 00023265 User Manual

Page 30

Advertising
background image

0

3. The originating caller can then press the CONF soft key shown on the

display to initiate a conference. Since Line 1 and 2 are both on hold,

the user will be prompted to select Line 1, Line 2 or Both to conference

with. The user can then use the soft keys to select the desired option.

If the BOTH soft key is selected a 4-way conference is established

between the originating caller, both lines and the intercom call.

Intercom Calls

One-Touch Intercom

1. On the base, in idle mode, press any

One-Touch Intercom button (1-

10) for the station you want to intercom with.

One-Touch button #1

represents handset 01, #2 represents handset 02, etc.

The Intercom paging ring will be emitted.

-OR-

You may press the

Intercom button, then press the Intercom/Memory

button (1-10) for the stations you want to intercom with.

-OR-

Press the

Intercom button, and all the registered handsets and the

base except itself list in the log, use the VOL (- or +) key to scroll to the

station you want to intercom with, and then press SELECT soft key to

confirm.

NOTE: To abort intercom call, press the STOP soft key.
NOTE: If the receiving station does not answer within 30 seconds, the

intercom call is cancelled. You will hear an error tone and “Unavailable”

shows in the display.

Answering an Intercom Call

When you receive an Intercom call, the display shows the Caller’s Name and

Phone ID.
If you want to answer with the speakerphone, press the Speaker button. If

you want to answer by headset, press the Headset button on the base or

the Talk button on the handset. The headset must be already connected.
If you do not want to answer this intercom call, press the REJECT soft key.

Page

The page feature helps you locate a misplaced handset.
1. Press the

Page button on the base. The handset beeps and the Visual

Indicator on the handset flashes. “Paging from Base” shows in the

handset display.

2. To cancel the page, press the

Page button on the base, or press STOP

soft key on the base, or press Exit key on the base, or press any key on

the handset. Otherwise the paging will last for 2 minutes.

Auto Standby

If you place the handset in the cradle while the handset is off the hook

(during a call), the call is automatically disconnected.

Intercom Calls

Advertising
This manual is related to the following products: