RCA DECT 00023265 User Manual

Page 33

Advertising
background image



Number of digits

Explanation

Example

7-digits:

7-digit telephone number

(i.e.555-5555)

10-digits:

3-digit area code

+7-digit telephone

(i.e.425-555-5555)

number

11-digits:

long distance code 1

(i.e. 1-425-555-5555)

+3-digit area code

+7-digit telephone number

4. To dial the displayed number, select a Line or press

Talk, Spk, or

Headset button.

If You Did Not Program Your Local Area Code
1. Use the

CID button to display the number you want to dial. You will

only see 10-digit numbers (i.e. 234-555-1234).

2. Press

Talk, Spk, Headset button or select a Line to dial back. You may

adjust the number format by pressing the FORMAT soft key before

dialing.

Call Waiting Caller ID

This feature allows you to see who is calling when you hear the call waiting

beep. The caller identification information appears in the display after you

hear the tone.
• Press the

Flash button to put the person to whom you’re talking on

hold and answer the incoming call.

IMPORTANT: To use all the features of this unit, you must subscribe to either

the standard Name/Number Caller ID Service or Caller ID with Call Waiting

Service. To know who is calling while you are on the phone, you must

subscribe to Caller ID with Call Waiting Service.

Memory Log and Phone Book (Directory) Memory

You may store data in the Phone Book Directory (up to 99 records) or an

Intercom/Memory (10 buttons located to the right of the number pad on

the base). The Phone Book and each Intercom/Memory Log stores up to 16

characters and 32 digits.
The records are stored by alphabetic ascending order.

Adding Phone Book Entries

1. Make sure the phone is

OFF (not in Talk mode).

2. Press the

DIR button.

3. Press the NEW soft key. “

Enter Name” shows in the display. Please refer

to section “Handset Name” for name editing method.

4. Press SAVE soft key. “

Enter Number” shows in the display.

5. Use the touch-tone pad to input a telephone number.

TIP: Press the #pause button twice to insert a pause in a number if

necessary.

6. Press the SAVE soft key to enter

VIP tone melody selection.

Memory

Advertising
This manual is related to the following products: