RIDGID 120V - Manual (Page 7)

Black and White Monitor + VCR, Color Monitor + VCR
Ridge Tool Company 5
Icon Legend
Monitor + VCR Set-Up
Tilt Stand
After positioning the Monitor + VCR in the desired location,
you may want to use the tilt stand for better viewing.
1. Place the Monitor + VCR in the desired location.
2. Hold the unit by the top handle and tip the unit back
so the front feet are off the ground.
3. Locate the tilt stand on the underside of the unit.
Rotate the tilt stand forward and set the unit in place.
(Figure 1)
Figure 1 – Tilt Stand
Monitor + VCR
Components
Monitor Controls
(Horizontal Hold,
Vertical Hold,
Brightness, Contrast,
Flip Switch)
MONITOR
VCR
POWER SUPPLY
Power Button
Connector for
SeeSnake
System Cable
Video Out Jack
Audio Out Jack
Keyed Microphone
Jack
Hands Free
Microphone/Speaker
Dimmer/Transmitter
Knob
Volume Control/Audio OFF
One Touch
Record Button
Power On
Power Off
Audio In/Out
Connector
Video In/Out
Connector
Volume
Control/Audio
Off Knob
Dimmer/Transmitter
Knob
Transmitter
Activated Position
SeeSnake System
Cable Connector
Keyed Microphone
Jack