Renesas REJ10J1837-0100 User Manual
Page 418
High-performance Embedded Workshop
3. Commands
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
403
Software Break Setting Commands (Available when the debugger is connected)
Command Name
Abbreviation
Description
SET_DISASSEMBLY_SOFT_BREAK
SDB
Sets or deletes a software breakpoint at the disassembly level.
SET_SOURCE_SOFT_BREAK
SSB
Sets or deletes a software breakpoint at the source level.
STATE_DISASSEMBLY_SOFT_BREAK
TDB
Enables or disables a software breakpoint at the disassembly level.
STATE_SOURCE_SOFT_BREAK
TSB
Enables or disables a software breakpoint at the source level.
Other Debugging Commands (Available when the debugger is connected)
Command Name
Abbreviation
Description
CONNECT *
CN
Connects the debugging platform.
DISCONNECT *
DN
Disconnects the debugging platform.
INITIALIZE
IN
Initializes the debugging platform system.
Note:
*. Support for this command depends on the debugger.
For the syntax of each command, refer to the online help.