RCA UND RECEIVER RTD250 - Manual (Page 26)

DVD Player
EN
23
Play mode
1. Refer to page 20 “General use” to open the playmode
menu.
2. Press the up/down buttons to select among :
Normal >Program edit/ Program play > Repeat AB >
Repeat Title > Repeat Chapter > Normal
3. Press OK to confirm the setting.
Program playback
Edit program
1. Refer to the previous page ("General use") to open the
play mode menu, or press and hold the PROGRAM button
on the front of the unit to access the program mode.
Note: Program edit can only be activated during STOP /
Resume mode. However, if there is program saved already,
program play can be activated during plaback mode.
2. The box under “Title” will be highlighted automatically.
Use the arrows on the remote to select title and chapter.
3. “Add” will be highlighted automatically after chapter is
selected. Press OK to add selected track and chapter(s) onto
playlist.
4. Move to highlight “Play” (start program playback) or
“Done” (return normal playback with program saved), then
press OK to start program playback or return to stop mode.
NOTE
Random playback is not available in DVD mode.
NOTE
You can select at maximum 32 items by repeating
steps 2 - 3.
RTD250-EN DVD 10/30/03 10:17 AM Page 5