RCA UND RECEIVER RTD250 - Manual (Page 32)

DVD Player
EN
29
TV aspect
This step selects the TV aspect, wide-screen (16:9) or
conventional (4:3).
1. Open the TV aspect menu.
2. Use the UP or DOWN arrows to select TV aspect and
then press OK to return to the main menu.
If you have a wide-screen (16:9) TV, choose “16:9
Widescreen”.
- For 16:9 movie you will get
(Do not select 16:9 widescreen setting
if you are using a 4:3 TV set. or the
image may look distorted with some
DVD disc.)
- For a 4:3 movie you will get
If you have a conventional (4:3) TV,
- if you select 4:3 letterbox for a 16:9
movie, you will get
- if you select 4:3 Pan Scan for a 16:9
movie, you will get (the left and right
edges are hidden)
- for a 4:3 movie, for both selections,
you will get
Note: You may need to deactivate progressive scan when viewing a video
program recorded in 4:3 aspect. Some 16:9 TV set will not be able to
adjust to 4:3 when progressive scan is ON. If this happens, try to disable
progressive scan.
Dynamic range
1. To disable/enable the dynamic function, enter the
dynamic range menu.
2. Use the UP or DOWN arrows to select Dynamic Range
and then press OK to return to the main menu.
Digital audio out
1. To select digital audio out, enter the digital audio out
menu.
2. Use the UP or DOWN arrows to select digital audio out
and then press OK to return to the main menu.
Soft
Softer
Off
Compressed
PCM
RTD250-EN DVD 10/30/03 10:17 AM Page 11