Roland FC-200 - Manual (Page 10)

10
SWITCHING MODES
You can change the mode using either the MODE button or a foot pedal plugged into the MODE jack (BOSS FS-5U,
Optional).
Each of these methods — pressing the button or stepping on the foot pedal — makes the mode change in a different way.
When the MODE Button is Pressed
Program Change Mode
Control Change Mode
Note Mode
Exclusive Mode
When the Foot Pedal is Depressed
Program Change Mode
Control Change Mode
* You can change the way the mode is switched when using the foot pedal. See “MODE Jack Loop
Setting” (p. 28) for the details on how to do this.
Determining the Current Mode
Program Change Mode
The Bank value appears on the display, and the Point indicators do not light up.
Control Change Mode
“ ” appears on the display, and the Point indicator at the top left of the display
lights up.
Note Mode
The note range appears on the display, and the Point indicator at the top right of
the display lights up.
Exclusive Mode
“ ” appears on the display, and the display’s two Point indicators light up.