Roland HP203 User Manual
Page 58
56
Recording
5.
Press the track button for the part you want to record, making the button flash.
This allows you to record while listening to the selected song.
The [
] button will light, the [
] button will flash, and the HP203 will enter recording
standby mode.
If you decide not to record, press the [
] button once again.
How performance parts correspond with track buttons
Starting Recording
6.
Press the [
] button.
After a two-measure count, recording will begin.
Even if you don’t press the [
] button, recording will begin when you play the keyboard. In
this case, a count won’t be sounded.
When recording begins, the [
] button and [
] button will light.
During the count, the display will indicate the measure number as “-2” and “-1.”
Stopping Recording
7.
Press the [
] button.
Recording will stop.
Listening to the Recorded Performance
If the “Int Song” indicator is not lit, press the [Int Song/Ext Song] button.
8.
Press the [
] button.
You will return to the beginning of the recorded performance.
9.
Press the [
] button.
The recorded performance will play.
10.
Press the [
] button once again to stop playback.
The recorded performance will disappear when you turn off the power. If you want to
keep the performance you recorded, you must save it in internal memory or USB
memory. Refer to p. 60.
If you have not saved the performance you recorded, you won’t be able to play back
another song. You’ll have to erase (p. 57) or save (p. 60) the performance before
playing back another song.
Track button
Performance part
Track [Right] button
Right-hand part
Track [Left] button
Left-hand part
Track [Accomp] button
Performance data other than the right-hand part and left-hand part
NOTE
NOTE
HP203_e.book 56 ページ ２００７年７月１７日 火曜日 午前１０時４６分