Save to internal memory (p. 61) – Roland HP203 User Manual
Page 63
61
Saving Your Performance
Selecting the Save destination for the Song
4.
Use the [-] [+] buttons to specify whether you want to save the song in
“Int” (Internal Memory) or “EXt” (USB memory or floppy disk).
If there is no song to save, the following screen will not appear.
Internal Memory
USB memory, floppy disk
5.
Press the [
] button.
A screen in which you can select the save-destination number will appear.
Internal Memory
USB memory, floppy disk
6.
Use the [-] [+] buttons to select the save-destination number.
If the dot in the lower right of the display is lit, a song has already been saved in that number.
Select a number at which no song has been saved.
If you want to erase an unwanted song and replace it with the newly saved song, select the
number of the unwanted song.
fig.d-SongExist-e.eps
Saving the Song
7.
Press the [
] button.
The display will indicate “Sur,” and the [
] button and [
] button will blink.
If you decide not to save the song, press the [
] button.
8.
Press the [
] button.
The song will be saved.
Never turn off the power while “SAv” is blinking in the display.
fig.d-SAv.eps
NOTE
Lit if a song has been saved
NOTE
HP203_e.book 61 ページ ２００７年７月１７日 火曜日 午前１０時４６分