Ricoh GX8 - Manual (Page 118)

116
Changing Image Confirmation Time
(LCD CONFIRM.)
Immediately after pressing the shutter button, the still image taken is
displayed for a moment so you can check it.
At purchase, Confirmation Time is set to one second, but this can be
changed.
To change Confirmation Time, follow the steps below.
1.
Turn the Mode Dial to 1.
2.
Press the " button to select [LCD
CONFIRM.].
3.
Press the #$ buttons to select the
desired setting.
This setting will be used until you change it
Possible Settings
OFF (Photo not displayed for confirmation)
1 Second *Initial setting at purchase
2 Seconds
3 Seconds