Raymarine DSM300 - Manual (Page 14)

14 DSM300 Operation with PLUS Series Displays
2.3 Selecting Sonar Mode
If properly connected to an hsb 2 PLUS Series Radar, Chartplotter or Fishfinder
display unit, you can begin viewing echo sounder data by setting the display to
Sonar mode.
Note: Data, such as depth, speed, temperature, log, and trip are still available even if So-
nar mode is not selected.
➤
To set the mode, press the DISPLAY key to show the DISPLAY pop-up, then
press again to cycle through the modes available, shown in Figure 2-1.
Figure 2-1: Using the DISPLAY Key
The selected mode is shown by an icon with a black (monochrome display) or red
(color LCD) border and the mode is displayed on the screen.
When SONAR mode is shown (as in Figure 2-1), press ENTER or CLEAR. The
default soft keys are displayed. The display shows the sounder screen.
DISPLAY
BRG 099o R
RNG 2.410 nm
CURSOR
60
0
0
ft
SELECT
WINDOWS
WINDOWS
OFF ON
SPLIT
HOR VER
D6191-1
"DISPLAY" TO SELECT FULL SCREEN OPTION
SOFTKEYS TO SELECT WINDOW OPTION
CHART SONAR LOG RADAR