Raymarine DSM300 - Manual (Page 24)

24 DSM300 Operation with PLUS Series Displays
➤
To change settings:
1. Press the MENU key in Sonar mode to display the set up soft keys.
2. Press the soft key for the set up you desire.
The requested set up menu is displayed, listing the parameters and their cur-
rent settings.
3. Use the trackpad to move the selection bar up and down the list. An arrow is
displayed at the top or bottom right-hand corner if you can scroll the list to dis-
play further parameters.
As each line is highlighted, the soft keys are updated to show the settings
available.
• For parameters that have a numeric value, or more than four possible set-
tings, a scroll list is displayed above two of the soft keys.
• Some parameters are controlled by a slider that is displayed above two of
the soft keys.
• For some parameters, a soft key provides access to a sub-menu of further
options.
4. Press the soft key corresponding to the desired setting or, for scroll lists, use
the soft keys to scroll forwards or backwards through the list until the desired
setting is displayed. This setting is retained when you move the selection bar
on to the next parameter in the menu list.
For sliders, press the appropriate soft key repeatedly to increase or decrease
the slider value in individual steps, or press and hold the key to change the
setting quickly.
5. Once you have set all the desired values, press ENTER to clear the menu and
return to the set up soft keys.
6. Press ENTER, MENU, or CLEAR to clear the soft keys and return to the
default display.
SYSTEM
SET UP¬
SONAR
SET UP¬
SCROLL
SPEED
TRIP
RESET
D5019-1