Radio Shack TFX-1032 - Manual (Page 9)

9
SETTING UP THE FAX MACHINE
INSTALLING THE PAPER
Follow these steps to install the paper
roll.
Note: Use only Radio Shack Cat. No.
43-1260 or 43-1264 Thermal Fax Pa-
per in your fax machine.
1. Open the operation panel.
2. Press OPEN to open the paper
cover.
3. Remove any slack from the roll
and place it in the paper holder in
the direction shown, with both
sides seated securely.
4. Insert the paper end into the
paper exit slot.
5. Pull out the end of the roll from the
exit slot until it extends about 4
inches.
6. Close the cover by firmly pressing
both left and right corners on the
back of the cover. The TFX-1032
automatically cuts the extra paper.
PAPER HANDLING
Thermal paper is heat-sensitive. Fol-
low these tips while handling it:
• Store unused thermal paper away
from high temperatures (158°F or
over) and high humidity. These
can darken the paper.
• Store copies away from direct
sunlight and at a temperature
below 94°F. Direct sunlight and
high heat can fade the image.
• Avoid storing thermal copies next
to blueprint (diazo) copies and
plastic film or binders. The chemi-
cals in these materials could fade
the image.
43-1204.fm Page 9 Wednesday, August 18, 1999 8:45 AM