Roberts Radio MP-30 - Manual (Page 7)

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
020 8758 0338 (Mon-Fri)
6
Using your radio for the first time - DAB
Your radio is supplied with mains adaptor
1. Place your radio on a flat surface. Insert the adaptor plug into the
DC socket located on the left hand of your radio.
2. Fully extend the telescopic aerial. The aerial should be fully ex-
tended and positioned for optimum reception.
3. Plug the adaptor into a standard 13 amp mains socket outlet.
4. When your radio is first switched on the display will show
"Roberts" and a quick scan of UK band III DAB and FM channels
will be carried out.
If the radio has been used before the last used mode will be
selected.
5. During Auto Tune as each group of stations is detected the display
will show the number of stations found and a bargraph indicating
progress of the Autotune.
6. When the Auto Tune is complete the first station (in numeric-alpha
order 0...9...A....Z) will be selected.
7. If the station list is still empty after the DAB Auto Tune your radio
will display "No.Signal".
8. If no signals are found it may be necessary to relocate your radio
to a position giving better reception.