RCA L42FHD2X48 - Manual (Page 8)

Removing Table Stand
Your TV comes with the table stand attached. If you want to mount your TV to the wall, remove the table
stand by following the instructions below:
Step 1
1. Take the TV bag and place it on a flat table.
2. Take the TV set and place it face down on
the TV bag.
Step 2
Remove the Table Stand from the TV cabinet by
taking off the three size M6 St-screws with a
screwdriver. (Note: there are four M5 St-screws
for models L46FHD2X48 & L52FHD2X48)
Step 3
Attach the Stand Cap to the TV cabinet .
TV cabinet with Stand Cap attached.
8
Chapter 1 Connections and Setup
Mounting Your TV to the Wall
To mount your TV to the wall, purchase a VESA wall mount
Models L42FHD2X48
/L46FHD2X48/L52FHD2X48
Purchase a VESA 600 x400, M6 screw
The VESA number is the horizontal and vertical measurement of the mounting holes. For example,
600x400 refers to fact that the mounting measurements are 600mm horizontally and 400mm vertically.
Follow the directions included with the wall mount to mount the TV to the wall.
Caution: Your wall
mount must be able to
bear a minimum of five
times the TV’s net
weight to avoid
causing damage.