RCA 32V524T - Manual (Page 10)

Viewing the Picture from the Connected Device
The device in this example, a DVD player, is connected to the TV’s Y Pb Pr and
VIDEO IN audio jacks. To view the DVD player:
1. Turn on the TV and the DVD player.
2. Use the INPUT button on the remote control to toggle through the Video Input
Channels until you see CVID displayed in the channel banner.
Connecting the Device
This connection allows you to connect a device that has Y Pb Pr jacks, for example, a
DVD player. If the device you are connecting also has S-Video or composite video, we
recommend you use the component video input for better quality.
The illustration on the previous page shows how to connect a DVD to your TV using
component (Y Pb Pr) and audio cables.
Using the example of a DVD player:
1. Connect your cable and/or antenna as described on page 5.
2. Connect your Y Pb Pr component video cables.
Connect three video grade cables to the Y Pb Pr jacks on the back of the TV and
to the Y Pb Pr outputs on the DVD player. Y Pb Pr cables are colored green, blue
and red. Just match the colors on the cables and Y Pb Pr jacks.
3. Connect your audio cables.
Connect the audio (white and red) cables to the VIDEO IN R and L Audio jacks on
the back of the TV and to the audio output jacks on the DVD player. Just match
the colors.
Important - Y Pb Pr cables can only be used with the VIDEO IN audio jacks located
on the back of the TV. You cannot use any other input jacks on this TV for this
connection.
Component Video
cables (Y Pb Pr) are
color coded- Green,
Blue and Red
Audio cables are color
coded- Red= right audio;
white= left audio
INPUT
button
Connections & Setup
8 Chapter 1