RCA 32V524T - Manual (Page 17)

DIGITAL INPUT Lets you connect a coaxial (RF) cable to receive digital
programming through your cable provider. Receive off-air digital programming via an
antenna. Refer to page 5 for more details.
VIDEO IN Lets you connect devices which have Audio/Video (composite) outputs
such as VCRs, DVD players, satellite receivers, cable boxes, camcorders and video
game consoles. Connect the left and right audio jacks for sound.
• VIDEO Provides composite video connection. The video connector is usually
yellow.
• AUDIO-L Provides left audio connection. The left audio connector is usually
white.
• AUDIO-R Provides right audio connection. The right audio connector is usually
red.
To access the device when using these jacks, use the INPUT button on your remote
until VID1 appears.
Explanation of Jacks
This section describes the jacks you can use to make connections. There are several
combinations available to connect devices to your TV.
Y, Pb, Pr Lets you connect devices which have component (Y Pb Pr) outputs such
as VCRs, DVD players, DVD-PVRs, DVD recorders, satellite receivers and cable boxes.
This connection provides optimum picture quality because the video is separated into
three signals. Use the VIDEO IN left and right audio jacks to connect for sound.
To access the device when using these jacks, use the INPUT button on your remote
until CVID appears.
Refer to page 7 for a detailed explanation of how to connect Y Pb Pr cables to your
TV.
VIDEO OUT VIDEO IN
ANTENNA/CABLE
ANALOG INPUT
ANTENNA/CABLE
DIGITAL INPUT
VIDEO OUT VIDEO IN
ANTENNA/CABLE
ANALOG INPUT
ANTENNA/CABLE
DIGITAL INPUT
ANALOG INPUT Lets you connect a coaxial (RF) cable to receive analog
programming through your cable provider. Receive off-air programming via an
antenna. Refer to page 5 for more details.
Use the ANTENNA button to toggle between these RF inputs.
Continues on next page...
VIDEO OUT VIDEO IN
ANTENNA/CABLE
ANALOG INPUT
ANTENNA/CABLE
DIGITAL INPUT
VIDEO OUT VIDEO IN
ANTENNA/CABLE
ANALOG INPUT
ANTENNA/CABLE
DIGITAL INPUT
Chapter 1 15
Connections & Setup