Roberts Radio CR9986 - Manual (Page 12)

11
Programmed play
By programming the player you can play up to 20 tracks in any desired
order.
1. Whilst the CD is in Stop mode, press the Program button. The
display will show ‘ P 01’ and the Program indicator will flash.
Note: the display will revert to showing time after 10 seconds of
inactivity.
2. Select the first track using the F.skip or B.skip buttons. The track
number will flash on the display. Store this track by pressing the
Program button.
3. Repeat the above steps until you have completed your program
(maximum 20 tracks). Press the Play/Pause button to commence
play of the selected tracks.
Erasing a programme
1. Whilst the CD is in Stop mode, press the Program button. The
Program indicator will flash.
2. Press the CD Stop button to erase the programme. Programmes
are also erased by opening the CD door, changing position of the
Function switch and interrupting the mains supply.
Checking a programme
1. Whilst the CD is in Stop mode, repeatedly press the Program
button to step through the tracks programmed.
PROG
1
2 2
PROG
2
3
PROG
1
PROG
1
2
PROGRAM
CR9986 Rev 1.pmd 5/19/2005, 8:28 AM 12