Roberts Radio CR9986 - Manual (Page 6)

TUNING
ON/OFF
5
Listening to the Radio
1. Switch on your CD clock radio by pressing the On/Off button. The
On indicator LED will light.
2. Slide the Function switch to the required waveband.
3. Tune in to the desired station by rotating the Tuning control. The
station frequency is indicated in the dial scale.
The Wire aerial located on the rear of your CD clock radio is for
FM reception. The wire should be fully extended and positioned for
optimum reception.
For MW and LW reception there is a built in ferrite aerial. Rotate your
CD clock radio to the position giving best reception.
4. Adjust the volume by rotating the Volume control.
5. When the Function switch is set to FM and the station being
received is an FM Stereo station the FM Stereo indicator will light.
6. The radio can be switched off by pressing the On/Off button. The
On indicator will switch off.
1
· CD
· LW
· MW
· FM
2
3
530 1600 600 700 800 1000 1300
150 280 180 220 260 260
88 108 92 96 100 104 106
MW
LW
FM
KHz
KHz
MHz
· CD
· LW
· MW
· FM
5
VOL
4
ON/OFF
6
FM ST.
CR9986 Rev 1.pmd 5/19/2005, 8:28 AM 6