Rosen Entertainment Systems 7002 - Manual (Page 16)

Rosen Aviation
Document Number: 100923 Revision: D
Date: 6/8/09
Template: 4.2.3-6-FM; Revision A; 16 May, 2005 Page 16 of 21
Select Switch Repeat Delay
Change the time between sources on the display. From the Advanced submenu, press
the
▼soft key to choose Select Switch Repeat Delay and then OK, as shown below.
Press the ◄ soft key several times to shorten the timing between repeats. Press the ►
soft key several times to lengthen the timing.
Press the Set soft key to set the timing and exit the dialog box.
Figure 26 Select Switch Repeat Delay settings and soft keys
Temperature Info
From the Advanced submenu, press the ▼ soft key to select Temperature Info and
confirm the status dialog box (below) opens, and then press Back to close it.
Figure 27 Read-only dialog about temperature status