Ryobi SS180 - Manual (Page 7)

7
SPECIFICATIONS
UNPACKING
INSTRUCTIONS
Your Speed Saw has been shipped completely
assembled.
■ Carefully remove the Speed Saw and accessories
from the box. Make sure that all items listed in the
packing list are included.
■ Inspect the Speed Saw carefully to make sure no
breakage or damage has occurred during
shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
APPLICATIONS
With the proper bit, you may use your Speed Saw for the purposes listed below:
■ Cutting electrical outlet openings in drywall or wood paneling.
■ Creating decorative wood accents.
■ Cutting tile.
NOTE: Most of these applications require different types of bits. Be sure to use the right-sized bit for your tool.
DANGER:
Do not cut electrical outlet openings with live electrical wires. Do not cut walls that may have live electrical wiring
behind them. Shut off breakers or remove fuses to disconnect the circuit. Always hold the tool by its motor
housing.
Collet 1/4 in. (6.4 mm)
Collet Adaptor 1/8 in. (3.2 mm)
No Load Speed 26,000 RPM
Charger Rating 120 VOLTS, 60 HZ, AC ONLY
Charge Time 1 hour
PACKING LIST
Speed Saw with Depth Adjustment Ring
Case
Bits (2)
Collet
Collet Adaptor
Circle Cutter
Battery Pack
Battery Charger
Wrench
Operator's Manual
WARNING:
If any parts are missing, do not operate this tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.