Radio Shack 21-1902 - Manual (Page 16)

16
Op
er
at
io
n
U
SING
H
I
/L
O
T
RANSMITTER
P
OWER
You can set the radio transmit power to
0.5W or 1.0W. The transmit power of
channel 8–14 is fixed at 0.5W only
(FRS channel). To select 1.0W transmit
power, make sure that the radio is not
on channels 8–14 and then press
MENU until
Lo
appears. If you select
OFF
, the radio transmit power is 1.0W;
select
ON
to set the transmit power to
0.5W. If you do not press any key within
20 seconds after entering this mode,
the radio exits the Menu without saving
any changes.
Ô
U
SING
C
OURTESY
T
ONE
You can set your radio so the person
you are communicating with will hear a
tone when you finish transmitting. To
turn on the radio courtesy tone, press
MENU repeatedly. appears and
ON
/
OFF
flashes on the display.
ON
appears
when the courtesy tone is on and OFF
appears when the courtesy tone is off.
Press
or to turn the courtesy
tone on or off. Press PTT to store the
setting.
Ô
NOTE
Ô
The Hi/Lo transmit
selection is not available
when using FRS
Channels 8–14.