Rosewill RNX-N400LX - Manual (Page 34)

Wireless Router RNX-N400LX User Manual
Attain DNS
Automatically
Click to select getting DNS address for DHCP support. Please select
Set DNS Manually if the DHCP support is selected.
Set DNS
Manually
Click to select getting DNS address for DHCP support.
DNS 1 Fill in the IP address of Domain Name Server 1.
DNS 2 Fill in the IP address of Domain Name Server 2.
DNS 3 Fill in the IP address of Domain Name Server 3.
Clone MAC
Address
Fill in the MAC address that is the MAC address to be cloned.
Enable uPNP Click the checkbox to enable uPNP function.
Enable IGMP
Proxy
Click the checkbox to enable IGMP Proxy.
Enable Ping
Access on WAN
Click the checkbox to enable WAN ICMP response.
Enable Web
Server Access on
WAN
Click the checkbox to enable web configuration from WAN side.
Enable IPsec
pass through on
VPN Connection
Click the checkbox to enable IPSec packet pass through.
Enable PPTP
pass through on
VPN Connection
Click the checkbox to enable PPTP packet pass through.
Enable L2TP
pass through on
VPN Connection
Click the checkbox to enable L2TP packet pass through.
Apply Changes
Click the Apply Changes button to complete the new configuration
setting.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
3.423 WAN Interface Setup – PPPoE
34