7where to put your machine, Machine environment, Moving – Ricoh Aficio IS 2225 User Manual

Page 153

Advertising
background image

Where to Put Your Machine

141

7

Where to Put Your Machine

Machine Environment

Choose your machine's location care-
fully. Environmental conditions
greatly affect its performance.

Optimum environmental conditions

R CAUTION:

R CAUTION:

• Temperature: 10-32 °C (50-89.6 °F)

(humidity to be 54% at 32 °C, 89.6 °F)

• Humidity: 15-80% (temperature to

be 27 °C, 80.6 °F at 80%)

• A strong and level base.
• The machine must be level within

5 mm, 0.2 inches: both front to rear
and left to right.

• To avoid possible buildup of ozone,

be sure to locate this machine in a
large well ventilated room that has
an air turnover of more than 30
m

3

/hr/person.

Environments to avoid

• Locations exposed to direct sun-

light or other sources of strong
light (more than 1,500 lux).

• Locations directly exposed to cool

air from an air conditioner or heated
air from a heater. (Sudden tempera-
ture changes can cause condensa-
tion to form inside the machine.)

• Locations close to machines gener-

ating ammonia, such as a diazo
copy machine.

• Places where the machine will be

subject to frequent strong vibration.

• Dusty areas.
• Areas with corrosive gases.

Moving

R CAUTION:

Important

❒ Be careful when moving the machine.

Take the following precautions:
• Turn off the main power. See p.24

“Turning Off the Main Power”.

• Unplug the power cord from

the wall outlet. When you pull
out the plug from the socket,
grip the plug to avoid damag-
ing the cord, thereby reducing
the risk of fire or electric shock.

• Close all covers and trays, in-

cluding the front cover and by-
pass tray.

Keep the machine away from hu-

midity and dust. Otherwise a fire
or an electric shock might occur.

Do not place the machine on an

unstable or tilted surface. If it top-
ples over, an injury might occur.

If you use the machine in a con-

fined space, make sure there is a
continuous air turnover.

Unplug the power cord from the

wall outlet before you move the
machine. While moving the ma-
chine, you should take care that
the power cord will not be dam-
aged under the machine.

RuC4_AE_gsg-F_FM_forPaper.book Page 141 Wednesday, April 6, 2005 3:43 PM

Advertising
This manual is related to the following products: