Radio Shack PRO-93 - Manual (Page 62)

62
Trunking Operation
1. Press TEXT while the scanner is receiving the voice
channel and indicating the text name. The ID code
appears as
)+0и444444 )+0и444444 )+0и444444 )+0и444444 or ! и4444 ! и4444 ! и4444 ! и4444 .
2. Press TEXT again to cancel.
Delay Function in ID Indication Mode
You can set the ID delay function separate from the
channel delay.
1. Press FUNC then ./DELAY while you are program-
ming the trunked ID. 1J<ý1Gó FNEýB<PJýKFýJ<Ký% 1J<ý 1Gó FNEý B<PJýKFýJ<Ký% 1J<ý1Gó FNEýB<PJýKFýJ<Ký% 1J<ý 1Gó FNEý B<PJýKFýJ<Ký%
;<C8P ;<C8P ;<C8P ;<C8P .
ээээ
ðôòýJ<:FE;J ðôòýJ<:FE;J ðôòýJ<:FE;J ðôòýJ<:FE;J appears.
2. Press
8 8 8 8
or
9 9 9 9
to select *FE< *FE< *FE< *FE< , тфн тфн тфн тфн , сфт сфт сфт сфт , сфн сфн сфн сфн , рфт рфт рфт рфт , рфн рфн рфн рфн ,
пфт пфт пфт пфт , пфн пфн пфн пфн or офт офт офт офт J<:FE;J J<:FE;J J<:FE;J J<:FE;J .
3. Press ENTER .
Note: When activated, ID delay watches the control
channel command for the delay time when the signal
disappears from the voice channel.
Reviewing Locked-Out Talk Group IDs
Note: You cannot clear all lockouts from a talk group at
the same time.
1. Press PGM then TRUNK .
2. Press FUNC then L/OUT . The locked out ID appears.
If the ID memory bank has no locked out ID, you
hear the low beep tone.
3. Press FUNC then
8 8 8 8
or
9 9 9 9
to select a search bank.
Or, just press
8 8 8 8
or
9 9 9 9
to search for any locked out
IDs in a bank.
Clearing Talk Group IDs
1. Press PGM then TRUNK .
2. Press FUNC ,
8 8 8 8
or
9 9 9 9
to select ID memory.
3. Press FUNC then CL .