Running the diagnostic tests, Running the leds test, 3 running the diagnostic tests – RAD Data comm ASM-60 User Manual
Page 35
Advertising
ASM-60 Installation and Operation Manual
Chapter 5 Diagnostics
Running the Diagnostic Tests
5-5
5.3 Running the Diagnostic Tests
Running the LEDs Test
The ASM-60 modem can perform the front-panel indicators test to verify that the
unit LEDs are functioning properly.
➤ To run the LEDs test:
1. From the Main menu, type 3.
The Test menu appears.
2. From the Test menu, type 2 to run the LEDs test on ASM-60.
All the front-panel LED indicators light up for 3 seconds.
Main Menu
↓↓↓↓ 3
Test
↓↓↓↓ 2
Start LEDs Test
Advertising